Model RCM-890BAS COFDM Carrier Monitor Fully Frequency Agile
DTi's Remote Carrier Monitor products provide an economical solution for remote signal monitoring & analysis. Perfect for detecting and recording signal interference or signal anomalies from one or multiple remote locations. An excellent solution for offsite troubleshooting, monitoring, and analysis.
RCM-890BAS Technical Specifications
Center Frequency:
815 MHz or 900 MHz (Receiver dependent)
Frequency Display:
Provided by Graphic User Interface (GUI).
Span Width:
50 MHz or 25 MHz (Software Selectable)
Resolution Bandwidth:
3MHz or 100KHz (Software Selectable)
RF Sensitivity:
Greater than -85dBm Typical
Reference Levels:
-10dBm, -30dBm or -50dBm (Software Selectable)
Scale:
5dB/Div
Amplitude Accuracy:
+/- 2dB typical
Dynamic Range:
40dB on Graphic User Interface (GUI).
Input Connector:
BNC, 50Ohm "F" Type connector adapter provided
Size:
1 Standard EIA Rack Unit
19"W x 1.75"H x 16"D
Power Requirements:
12VDC 1.5A (Provided by Receiver)
Display:
DTI Graphical User Interface
Note: Specifications are based on Dominion Test Instruments control system and graphical user interface and may vary depending on the control system used. Please contact DTI for specifications based on the selected platform.
Developed for the 2GHz BAS Relocation Program
The RCM-890BAS product has been specifically designed to make your next ENG shot a success and help eliminate the guess work. With the new COFDM technology there are several hurdles that can make the difference between making an ENG shot or missing one. With the RCM-890BAS the ENG technician can optimize the antenna's signal gain, make certain the signal is not being overdriven and monitor for adjacent carriers that may cause distortion.
Features & Benefits
Custom Design The RCM-890BAS is designed to monitor the Receiver's IF frequencies of 815 MHz or 900 MHz.
Rack Mount Design The RCM-890BAS is housed in a small 1RU rack mount chassis to allow for mounting in a rack without occupying valuable rack space.
Variable Reference Levels The RCM-890BAS will allow the user to select different reference levels from -10 to -50dBm to allow viewing of strong or weak signals.
Center Frequency Tuning The RCM-890BAS will automatically tune to the Receivers IF frequency of 815 MHz of 900 MHz making it easy for the ENG Technician to monitor the proper IF frequency effortlessly.
Two Selectable Span Settings The RCM-890BAS has preset span widths of 25 MHz or 50 MHz.
Manufacture of test equipment and accessories for the Broadcast, Satellite, Wireless, RFID, CATV and Military markets.
Please contact us for more information. If you are experiencing problems with this site please notify our webmaster.
